PRODUCTS | Split Shaft PTO

Type : OPS331 | Horizontal Split Shaft Unit

Main Drive
Max. continuous torque
Max. intermittent torque
Max.Speed
2.141 Kgm | 21.000 Nm
3.000 Kgm | 29.419 Nm
2,500 – 3,300 RPM
Auxiliary Outputs
Available outputs                                       Pneumatic Clutch | Mechanical | Hydraulic
Max. power available at shaft
Max. torque available at shaft 
110 (kW) *(130 kW)
122 Kgm | 1.200 Nm*
Max. output speed  2.500 (rpm)
Available drive ratios
Power take-off operational with vehicle
1 to 1.27 (standard) ; 1 to 1 (special)
Stationary (standard) ; in motion (special)
Available Outputs                                       Hydraulic
Max Torque available at shaft 40 Kgm | 400 (Nm)*
Max power available at shaft 35 (kW)*
Available drive ratios
Power take-off operational with vehicle 
1 to 1,62
Stationary (standard) ; in motion (special)

* Contact us for higher power or torque requirements.
Description
OPS-331 is suitable for over than 16-ton trucks.
equivalent to PC4/3000, PFT-PC2/3000.
Weight : 183 kg

Type : OPS331  |  Horizontal Split Shaft Unit Optima DrivesType : OPS331  |  Horizontal Split Shaft Unit

Type : OPS532 | Horizontal Split Shaft Unit

Main Drive
Torque 2000 Kgm | 19613 Nm
Auxiliary Outputs
Max Torque available at shaft 90 Kgm  | 882 Nm
Max. output speed  1500 (rpm) - 140 kw
Output ratio 1/1,43
Available Outputs Hydraulic
Torque 40 Kgm  | 392 Nm
Available drive ratios 1/1,65

Description
OPS.532 is suitable for 8-16 ton trucks.

WITH CLUTCH
 

Type : OPS532  |  Horizontal Split Shaft Unit Optima DrivesType : OPS532  |  Horizontal Split Shaft Unit

TYPE : OPS832 | HORIZONTAL SPLIT SHAFT UNIT

Main Drive
Torque 400 kgm I 3922 Nm
Auxiliary Outputs
Max Torque available at shaft 60 Kgm
Max. output speed  1500 (rpm)
Output ratio 1 / 1,25
Available Outputs Hydraulic
Torque 40 kgm
Available drive ratios 1/1,65

Description
Weight 45 kg
Truck size range 3-8 ton trucks.
WITH CLUTCH
 

TYPE : OPS832  |  HORIZONTAL SPLIT SHAFT UNIT Optima DrivesTYPE : OPS832  |  HORIZONTAL SPLIT SHAFT UNIT

TYPE : OPS642 | HORIZONTAL SPLIT SHAFT UNIT

Main Drive
Torque 3.000 Kgm I 29.419 Nm
Auxiliary Outputs
Max Torque available at shaft 110 Kgm | 1.078 Nm
Max. output speed  - (rpm)
Output ratio 1 / 1.28
Transfer Ratio 1 / 1.62
Control Air
Max. Output power 110 kW

Description
Weight 183 kg
OPS642 has been specially designed for concrete pumps.
Equivalent to omsi PFT-PC6/3000.
Suitable for Cifa, etc concrete pumps

 

 

TYPE : OPS642 | HORIZONTAL SPLIT SHAFT UNIT Optima DrivesTYPE : OPS642 | HORIZONTAL SPLIT SHAFT UNIT

TYPE : OPS852 | HYDROSTATIC DRIVE

Torque mechanic drive 3.000 Kgm I 29.420 Nm
Torque hydrostatic drive max 450 Kgm | 4.412 Nm
Auxiliary Outputs
Max Torque available at shaft 100 Kgm I 988 Nm
Maximum Speed  :
Available ratios 1/1  -  4.5/1
 
Power-pump outputs  154 kW
   
Control Pneumatic
Hydraulic Pump distance is: 350mm

Weight: 170 kg
Equivalent to HT 400/1200, HT 380/3000.
But OPS-852's main shaft torque is 3 times stronger than HT400/1200.

Description
OPS852 gearbox for combined drive systems is designed for vehicles with a drive train over 18 tons, calling for very low speeds and easy control during work (hydrostatic), and requiring mechanical drive be restored during transfer, so that top speed can be reached. Some application examples are; vehicles for street sweeper trucks and airport forwards (sweepers), high-pressure and vacuum cleaning vehicles, sewer cleaners and septic tankers, street flushers.
Groups for the mechanical and hydrostatic drive with flange mounts for hydraulic pumps and motors. 

TYPE : OPS852  |  HYDROSTATIC DRIVE Optima DrivesTYPE : OPS852  |  HYDROSTATIC DRIVE

TYPE : OPS782 | HYDROSTATIC DRIVE

Torque mechanic drive 3.000 Kgm I 29.420 Nm
Torque hydrostatic drive max 450 Kgm | 4.412 Nm
Auxiliary Outputs
Max Torque available at shaft 105 Kgm I 1.029 Nm
Maximum Speed 3.950 rpm
 Available ratios 1/1-4,5/1, 0.98-4.41/1
 
Power-pump outputs   kW
   
Control Pneumatic
Hydraulic Pump distance is 382mm

Weight: 210 kg
Equivalent to HT 380/3000

Description
OPS-782 gearbox for combined drive systems is designed for vehicles with a drive train over 18 tons, calling for very low speeds and easy control during work (hydrostatic), and requiring mechanical drive be restored during transfer, so that top speed can be reached. Some application examples are; vehicles for street sweeper trucks and airport forwards (sweepers), high-pressure and vacuum cleaning vehicles, sewer cleaners and septic tankers, street flushers. Groups for the mechanical and hydrostatic drive with flange mounts for hydraulic pumps and motors. 

TYPE : OPS782  |  HYDROSTATIC DRIVE Optima DrivesTYPE : OPS782  |  HYDROSTATIC DRIVE

Type : OPS871 | Horizontal Split Shaft Unit

Inlet Torque 400 Kgm | 3922 Nm
Outlet Torque 50 Kgm | 490 Nm
Ratio 1/1,56

Description
Weight: 36 kg - Special Monoblock design - without Clutch
Truck size range 3 to 8 t.  and suitable for without PTO outlet trucks
* Intermediate transmission system for heavy-duty trucks (Mitsubishi, Isuzu, Hino, etc.)
 

Type : OPS871  |  Horizontal Split Shaft Unit Optima DrivesType : OPS871  |  Horizontal Split Shaft Unit

TYPE : OPS482 | SPLIT SHAFT PTO

Inlet Torque 400 Kgm
Output Torque 50 Kgm
Ratio 1/1,48

CONTROL

 

VACUUM | MECHANIC | PNEUMATIC

 
   
Description  
Weight :40 kg  

 equivalent to PFT 300

TYPE : OPS482 | SPLIT SHAFT PTO Optima DrivesTYPE : OPS482 | SPLIT SHAFT PTO

Type : OPS881 | Horizontal Split Shaft Unit

Inlet Torque 400 Kgm | 3922 Nm
Outlet Torque 50 Kgm | 490 Nm
Ratio 1/1,56

Description
Weight: 45 kg - Special Monoblock design - without Clutch
Truck size range 3 to 8 t.  and suitable for without PTO outlet trucks
* Intermediate transmission system for heavy-duty trucks (Mitsubishi, Isuzu, Hino, etc.)​

Type : OPS881  |  Horizontal Split Shaft Unit Optima DrivesType : OPS881  |  Horizontal Split Shaft Unit

Type : OPS951 | Horizontal Split Shaft Unit

Inlet Torque 400 Kgm | 3922 Nm
Outlet Torque 25 Kgm | 245 Nm
Ratio 1/2,25
Direction of Rotation  Left

Description
Weight: 12 kg - with PTO: 25 kg: This version is without the Clutch system.
* suitable for without PTO outlet trucks
* Intermediate transmission system for heavy-duty trucks (Mitsubishi, Isuzu, etc.)
* Equivalent to IPH, PZB, MUNCIE, 

Type : OPS951  |  Horizontal Split Shaft Unit Optima DrivesType : OPS951  |  Horizontal Split Shaft Unit

Type : OPS541 | Horizontal Split Shaft Unit

Inlet Torque 210 Kgm | 2059 Nm
Outlet Torque 25 Kgm | 245 Nm

Description 
Weight: 12 kg - This version is without the Clutch system.
* suitable for without PTO outlet trucks
* Intermediate transmission system for light-duty trucks (MB Sprinter, Ford Transit,
Volkswagen, etc.)
* Equivalent to IPH, PZB, MUNCIE, 

Type : OPS541  |  Horizontal Split Shaft Unit Optima DrivesType : OPS541  |  Horizontal Split Shaft Unit

Type : OPS371 | Vertical Split Shaft Unit

Main Drive
Torque 3000 Kgm 29.420 Nm
Output Shaft
Torque 130 Kgm | 1.275 Nm
Speed / RPM  
Output ratio 1/1,28
Output of Hydraulic
Torque 400 Nm | 3922 Nm
Max. output power 35 Kw
Output ratio 1/1,28

Description
WITHOUT CLUTCH
Equivalent to PFT 3000/4AV-E

 

Type : OPS371  |  Vertical Split Shaft Unit Optima DrivesType : OPS371  |  Vertical Split Shaft Unit

Type : OPS002 | Vertical Split Shaft Unit

Main Drive
Torque 3500 Kgm | 34.323 Nm
Output Shaft
Torque 160 Kgm  |  1.569 Nm
Speed / RPM  
Output ratio 1/1,28
Output of Hydraulic
Torque  
Power 35 Kw
Ratio 1/1,62

Description
WITH CLUTCH  -  Special Monoblock Design.
Equivalent to PFT-PCV/3000
* centerline pump output; capable to drive up to 10.000 lt pump.
* Shaft distance is 420 mm.

Type : OPS002  |  Vertical Split Shaft Unit Optima DrivesType : OPS002  |  Vertical Split Shaft Unit

TYPE : OPS452 | VERTICAL SPLIT SHAFT UNIT

Main Drive Torque 2100 Kgm I 20.593 Nm
   
Auxiliary Outputs
Max Torque available at shaft 80 Kgm
Max. output speed   (rpm)
Output ratio 1 / 1,90
   
Available Outputs Hydraulic
Torque 40 Kgm
Available drive ratios 1,9
   
Control Air or Mechanical

Description:
Weight 105kg
Aluminium Housing
Truck Size Range: 
Engine-driven power take-offs for truck-mounted equipment and industrial applications -Drilling Rigs,
Equivalent to PFT-450/2AV

TYPE : OPS452 | VERTICAL SPLIT SHAFT UNIT Optima DrivesTYPE : OPS452 | VERTICAL SPLIT SHAFT UNIT

Type : OPS381 | Vertical Split Shaft Unit

Main Drive
Torque 2100 kgm | 20593 Nm
Output Shaft
Torque 80 kgm | 784 Nm
Speed / RPM  
Output ratio 1/2

Description
Equivalent to PFT-1700/2AV

Type : OPS381  |  Vertical Split Shaft Unit Optima DrivesType : OPS381  |  Vertical Split Shaft Unit

Type : OPS481 | Vertical Split Shaft Unit

Inlet Torque 400 Kgm | 3922 Nm
Outlet Torque 50 Kgm | 490 Nm
Ratio 1/1,76

Description
Truck size range 3 to 8 ton
Weight: 42 kg
*Suitable for without PTO outlet trucks
*Intermediate transmission system for heavy-duty trucks (Mitsubishi, Isuzu, Hino, etc.)

Type : OPS481  |  Vertical Split Shaft Unit Optima DrivesType : OPS481  |  Vertical Split Shaft Unit

TYPE : OPS222 | HYDROSTATIC TRANSMISSION

Main Drive
Torque 3000 kgm I 29420 Nm
Output Shaft
Torque 130 kgm I 1275 Nm
Speed / RPM 1500 (rpm)
Output ratio 1 / 1,28
Output of Hydraulic
Torque 400 Nm (3922 Nm)
Max. output power 35 kw
Output ratio 1/1,28

Description
Weight: 181 kg

TYPE : OPS222 | HYDROSTATIC TRANSMISSION Optima DrivesTYPE : OPS222 | HYDROSTATIC TRANSMISSION

TYPE : OPS182 |

Main Drive Torque_A 400 Kgm - 3.922 Nm
   
Shaft Output_C  
Torque 60 Kgm - 588 Nm
Exchange ratio 0,98
   
Hydraulic Output_B  
Torque 50 Kgm - 490 Nm
Exchange ratio 0,98
   
Control Vacuum / Air / Mechanic
   
Description  

* Shaft distance is 600 mm.

 

TYPE : OPS182 | Optima DrivesTYPE : OPS182 |

TYPE : OPS122 | Auxiliary drives

Torque A: 120 Kgm I B: 100 Kgm
Ratio A: 1/1  I  B: 1/1,25
Direction of Rotation COUNTERCLOCKWISE(CCW)

Description
Designed for Mercedes ATEGO Trucks. With included self-reduction, it will provide all the power you need for your equipment.
Suitable for MB Atego 1215 - 1217 - 1517 - 1523 - 2124 
Gearbox Type : G 60-6 (9,20) / G 85-6 (6,70) G 90-6 / G 71-6 / G 70-6

TYPE : OPS122 | Auxiliary drives Optima DrivesTYPE : OPS122 | Auxiliary drives

Type : OPS691 | Auxiliary Drives

A version
Torque 85 kgm
Ratio 1/1
Direction of Rotation  Right
B version
Torque 60 kgm
Ratio 1/1,91
Direction of Rotation  Left

Description
weight : 30 kg

* Self-reduction PTO, designed for ZF 16 S 151, 16S221, 16S181
* Equivalent: N 221 /10 B, No: 6091004025, MAN: 81381006572

 

Type : OPS691 | Auxiliary Drives Optima DrivesType : OPS691 | Auxiliary Drives

Type : OPS841 | Auxiliary Drives

A version
Torque 85 kgm
Ratio 1/1
Direction of Rotation  Right
B version
Torque 60 kgm
Ratio 1/1,91
Direction of Rotation  Left

Description
* Self-reduction PTO for MAN, IVECO, RVI ( ZF 16S 151 - ZF 16S 221 )
* Equivalent: ZF N 221 / 10 B - IT, No: 6019 005 019, MAN: 81381006585
weight : 24 kg

Type : OPS841 | Auxiliary Drives Optima DrivesType : OPS841 | Auxiliary Drives

Type : OPS941 | Auxiliary Drives

A version
Torque 70 kgm
Ratio 1/1,2
Direction of Rotation  Left
B version
Torque 100 kgm
Ratio 1/2,0
Direction of Rotation  Right

Description
weight : 26 kg
* Self-reduction PTO for VOLVO (R 1400, R 1700, SR 1400, SR 1700)

Type : OPS941 | Auxiliary Drives Optima DrivesType : OPS941 | Auxiliary Drives

Type : OPS641 | Auxiliary Drives

Torque 100 kgm
Power Output 30 HP-22KW
Ratio 1/1,84
Direction of Rotation  Left

Description
weight : 37 kg
* Self-reduction PTO with double output for Mercedes Axor 2528 / 2523 / 3228

Type : OPS641 | Auxiliary Drives Optima DrivesType : OPS641 | Auxiliary Drives

Type : OPS351 | Auxiliary Drives

Torque 100 kgm
Ratio 1/2,25
Direction of Rotation  Left

Description
weight : 36 kg
* Self-reduction PTO for Mercedes Axor, Actros ( G125, 135, 180, 200, 210 )

Type : OPS351 | Auxiliary Drives Optima DrivesType : OPS351 | Auxiliary Drives

Type : OPS741 | Auxiliary Drives

Torque 100 kgm
Ratio 1/1,25- 1/1,54
Direction of Rotation  Left

Description
Weight : 24 kg
* Self-reduction PTO for Mercedes, MAN, Ford ( ZF 16S 109 - ZF 9S 109 - ZF 9S - 75 )

Type : OPS741 | Auxiliary Drives Optima DrivesType : OPS741 | Auxiliary Drives

TYPE : OPS442 | PNEUMATIC CLUTCH

Output Torque 110 Kgm
Output Cycle 3500
Ratio 1/1

Description
New Clutched connection. Now you can engage and disengage shafts while they are working.
Weight: 25 kg 
Other ratios available on request.

TYPE : OPS442 | PNEUMATIC CLUTCH Optima DrivesTYPE : OPS442 | PNEUMATIC CLUTCH

TYPE : OPS842 | PNEUMATIC CLUTCH

Output Torque 60 Kgm
Output Cycle 3500
Ratio 1/1

Description
Weight: 17 kg 
Other ratios available on request.

TYPE : OPS842 | PNEUMATIC CLUTCH Optima DrivesTYPE : OPS842 | PNEUMATIC CLUTCH
* The original part numbers, reference numbers and brand names are used only for identification purposes. They do not imply that the products are original (OEM).