PRODUCTS | Hydrostatic Drives

Mechanic Drive Torque 3.000 Kgm 29.420 Nm
Hydrostatic Drive Torque 105 Kgm | 1.029 Nm
Auxiliary Outputs
Max Torque available at shaft  
Maximum Speed 3.950 rpm
 Available ratios 1/1-4,5/1, 0.98-4.41/1
 
Power-pump outputs   kW
   
Control Pneumatic
Hydraulic Pump distance is 382 mm

Weight: 210 kg
Equivalent to HT 380/3000, HT600/3000

Description
OPS-782 gearbox for combined drive systems is designed for vehicles with a drive train over 18 tons, calling for very low speeds and easy control during work (hydrostatic), and requiring mechanical drive be restored during transfer, so that top speed can be reached. Some application examples are; vehicles for street sweeper trucks and airport forwards (sweepers), high-pressure and vacuum cleaning vehicles, sewer cleaners and septic tankers, street flushers. Groups for the mechanical and hydrostatic drive with flange mounts for hydraulic pumps and motors. They are set up to a couple of hydraulic pumps and a hydraulic motor that, when connected through a hydraulic circuit, permits the conversion of the vehicle’s traction from mechanical to hydrostatic. 

Hydrostatic PTO, hydro-mechanical drive, Hydrostatic drive, hydro-mechanical transmission, hydrostatic power take-offs, Hydrostatic transfer case, hydro - mechanical drives, Hydrostatic / mechanical transmission, Omsi HT 380/3000, OMSI HT380/3000, creep drive transfer case, creep drive, Optima DrivesHydrostatic PTO, hydro-mechanical drive, Hydrostatic drive, hydro-mechanical transmission, hydrostatic power take-offs, Hydrostatic transfer case, hydro - mechanical drives, Hydrostatic / mechanical transmission, Omsi HT 380/3000, OMSI HT380/3000, creep drive transfer case, creep drive,
Mechanical Drive Torque 3.000 Kgm29.420 Nm
Hydrostatic Drive Torque 100 Kgm | 1.000 Nm
Auxiliary Outputs
Max Torque available at shaft  
Maximum Speed   
Available ratios 1/1  -  4.5/1
 
Power-pump outputs  154 kW
   
Control Pneumatic | operating air pressure range: 7-8 bar
Hydraulic Pump distance is: 350 mm

Weight: 170 kg
Equivalent to HT 400/1200, HT 380/3000.
But OPS-852's main shaft torque is 3 times stronger than HT400/1200.

Description
OPS852 gearbox for combined drive systems is designed for vehicles with a drive train over 18 tons, calling for very low speeds and easy control during work (hydrostatic), and requiring mechanical drive be restored during transfer, so that top speed can be reached. Some application examples are; vehicles for street sweeper trucks and airport forwards (sweepers), high-pressure and vacuum cleaning vehicles, sewer cleaners and septic tankers, street flushers. Groups for the mechanical and hydrostatic drive with flange mounts for hydraulic pumps and motors. They are set up to a couple of hydraulic pumps and a hydraulic motor that, when connected through a hydraulic circuit, permits the conversion of the vehicle’s traction from mechanical to hydrostatic. 

Hydrostatic drive, hydro-mechanical drive, hydrostatic power take-offs, Hydrostatic transfer case, hydro - mechanical drives, Omsi HT400/1200, HT380/3000, creep drive transfer case, creep drive, Optima DrivesHydrostatic drive, hydro-mechanical drive, hydrostatic power take-offs, Hydrostatic transfer case, hydro - mechanical drives, Omsi HT400/1200, HT380/3000, creep drive transfer case, creep drive,
Main Drive
Maximum continuous torque 3.000 Kgm I 29.420 Nm
Output Shaft - UPPER POWER TAKE-OFF
Maximum continuous torque 
Maximum torque (special version) 
110 Kgm1.100 Nm
* 200 Kgm 2.000 Nm
Speed / RPM  
Output ratio 1 / 1,27
Auxiliary Output - Hydrostatic
Torque 80 Kgm I 785 Nm
Max. output power  
Output ratio 1 / 2,30

Additional Hydraulic pump output: 400 Nm and 35 kW Power

* Contact us for higher power, torque, or special ratio requirements.

Description
Weight: 181 kg
Equivalent to PZB 42903 HT, 42904 HT, PFT-PCH/3000, 
* tailor-made gearboxes, custom made gearbox, bespoke gearbox

Hydrostatic drive, hydro-mechanical transmission, hydrostatic power take-offs, Hydrostatic transfer case, hydro - mechanical drives, Driving unit for hydrostatic transmission, PFT-PCH/3000, creep drive transfer case, creep drive, Optima DrivesHydrostatic drive, hydro-mechanical transmission, hydrostatic power take-offs, Hydrostatic transfer case, hydro - mechanical drives, Driving unit for hydrostatic transmission, PFT-PCH/3000, creep drive transfer case, creep drive,
HYDROSTATIC CASE MODULE
Maximum continuous torque   100 Kgm | 1.000 Nm
Maximum intermittent torque   
Maximum speed   
Available drive ratios  max 1/4,41 *
MAIN DRIVE 
Maximum continuous torque 3.000 Kgm | 30.000 Nm
Maximum intermittent torque 3.500 Kgm | 35.000 Nm
Maximum intermittent torque (special version)  
Maximum speed  
AUXILIARY OUTPUTS  
UPPER POWER TAKE-OFF 
Torque  350 Kgm | 3.500 Nm 
Ratio 1/1,28 (standard)
1:1 (special)
INTERMEDIATE POWER TAKE-OFF (Hydraulic)  
   
Ratio 1/1,23
Shaft distance 438 mm
* Contact us for higher power, torque, or special ratio requirements.
(*)
DESCRIPTION: For Hydrostatic and Mechanical Transmission. Creep Drive.
Dual clutch drive for top Hydraulic pumps and hydrostatic driveline for creep control.
* Equivalent to PFT-PCH/3000

The Transfer Case OPS923/H with a hydrostatic case module mounted at the main transmission output. It has been designed primarily for dry vacuum equipment, road and airport maintenance vehicles for asphalt regeneration, and vehicles for hi-rail applications.
Hydrostatic drive, Hydrostatic gearbox, hydro-mechanical drive, hydrostatic power take-offs, Hydrostatic transfer case, hydro - mechanical drives,  omsi PFT-PCH/3000, PCH-3000, Omsi HT400/1200, HT380/3000, creep drive transfer case, creep drive, reep drive, creep gearbox, creep transfer case, Hydrostatic gearbox, Hydrostatic Split Shaft PTO, Optima DrivesHydrostatic drive, Hydrostatic gearbox, hydro-mechanical drive, hydrostatic power take-offs, Hydrostatic transfer case, hydro - mechanical drives,  omsi PFT-PCH/3000, PCH-3000, Omsi HT400/1200, HT380/3000, creep drive transfer case, creep drive, reep drive, creep gearbox, creep transfer case, Hydrostatic gearbox, Hydrostatic Split Shaft PTO,
* The original part numbers, reference numbers and brand names are used only for identification purposes. They do not imply that the products are original (OEM).